Plate Dryer Machine

What is the Plate Dryer Machine

Machine Video Link:https://youtu.be/aCmMlbCRyxM

PLG series Plate Dryer Machine is a kind of high efficiency conducting and continuous drying equipment. Its unique structure and operating principle provide advantages of high heat efficiency, low energy consumption, less occupying area, simple configuration, easy operation and control as well as good operating environment etc. It is widely used in drying process in the fields of chemical, pharmaceuticals, agricultural chemicals, foodstuff, fodder, process of agricultural and by-products etc., and is well received by various industries. Now there are three big categories, normal pressure, closed and vacuum styles and four specifications of 1200, 1500, 2200 and 2500; and three kinds of constructions A (carbon steel), B (stainless steel for contact parts) and C (on the basis of B to add stainless steel for s team pipes, main shaft and support, and stainless steel linings for cylinder body and top cover).With a drying area of 4 to 180 square meters, now we have hundreds of models of series products and various kinds of auxiliary devices available to meet requirements of various products.

Spec	Diameter mm	High mm	Area of dry m2	Power Kw
1200/4	Φ1850	2718	3.3	1
1200/8		3558	6.6	1.5
1200/12		4398	9.9	2.2
1500/6	Φ2100	3022	8
1500/8		3442	10.7
1500/12		4282	16.1	3
1500/16		5122	21.5
2200/6	Φ2900	3319	18.5
2200/10		4159	30.8	4
2200/14		4999	43.1	5.5
2200/18		5839	55.4	7.5
2200/22		6679	67.7	11
2200/26		7519	80
2500/6	Φ3150	3319	26.3	4
2500/10		4159	43.8	5.5
2500/14		4999	61.3	7.5
2500/18		5839	78.8	11
2500/22		6679	96.3
2500/24		7099	105	13
3000/8	Φ3800	4050	48	11
3000/12		5250	72
3000/18		7050	108	13
3000/26		9450	156	15
3000/28		10050	168

Plate Dryer Working Principle 

Wet materials are fed continuously to the top drying layer in the dryer. They will be turned and stirred continuously by harrows when the harrow’s arm rotates, the material flows through the surface of the drying plate along the exponential helical line. On the small drying plate the material will be moved to its exterior edge and drop down to the exterior edge of the large drying plate underneath, and will then be moved inward and drop down from its central hole to the small drying plate on the next layer. Both small and large drying plates are arranged alternately so as materials can go through the whole dryer continuously. The heating media, which could be saturated steam, hot water or thermal oil, will be led into hollow drying plates from one end to other end of the dryer. The dried product will drop from the last layer of the drying plate to the bottom layer of the smell body, and will be moved by harrows to the discharge port. The moisture exhausts from materials and will be removed from the moist discharge port on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate dryer. The dried product discharged from the bottom layer can be packed directly. The drying capability can be raised up if equipped with supplementary devices such as finned heater, condenser for solvent recovery, bag dust filter, return and mix mechanism for dried materials and suction fan etc. solvent in those paste state and heat sensitive materials can be easily recovered, and thermal decomposition and reaction can be also carried out.

Plate Dryer Main Feature

I. Easy regulation and control, strong adaptability

*Regulate thickness of materials, rotating speed of main shaft, number of harrow’s arm, style of and sizes harrows achieve best drying process.

*Each layer of drying plate can be fed with hot or cold media individually to heat or cold materials and make temperature control accurate and easy.

*Stay time of materials can be accurately adjusted.

*Single flowing direction of materials without return flowing and mixing, uniform drying and stable quality, no re-mixing is required.

II. Easy and simple operation

*Start and stop of dryer is quite simple

*After material feeding is stopped; they can be easily discharged out of the dryer by harrows.

*Careful cleaning and observation can be carried inside the equipment through large-scale viewing window.

III. Low energy consumption

*Thinner layer of materials, low speed of main shaft, small power and energy required for conveying system of materials.

*Drying by conducting heat so it has high heating efficiency and low energy consumption.

IV. Friendly environment, solvent can be retrieved and dust powder discharge can meet requirement.

*Normal pressure: as low speed of air flow inside the equipment and moisture being high in upper part and low in lower part, dust powder couldn’t float to the equipment, so there is almost no dust powder in tail gas discharged from the moist discharge port on the top.

*Close type: equipped with solvent recovery device that can recover organic solvent easily from moist-carrier gas. The solvent recovery device has simple structure and high recovery rate, and nitrogen can be used as moist-carrier gas in closed circulation for those subject to burning, explosion and oxidation, and poisonous materials in order for safe operation. Especially suitable for drying of flammable, explosive and poisonous materials.

*Vacuum style: if the plate dryer is operating under vacuum state, it is particularly suitable for drying heat sensitive materials.

V. Easy installation and small occupying area

*As the dryer is in a whole for delivery, it is quite easy to install and fix at site only by hoisting.

*As drying plates being arranged by layers and installed vertically, it takes a small occupying area though drying area is large. 

Product Details

 

Plate Dryer Key  APLLICATION

Organic chemicals * Mineral chemical s *Pharmaceutical and foodstuff * Feed and fertilizer

Our Services

24 hours per day,365 days per year online service

Enquiry will be replied in 2 hours

One year warranty

OEM & ODM are available

Free spare parts for any breakdown under convincing eviden

About Us

Billicom is a group company specializing in dehydration treatment of various industrial materials, headquartered in Changzhou City, Jiangsu Province, with business in more than 20 countries and regions, selling products to customers all over the world. We are committed to innovative design and manufacturing, providing and serving high-value equipment solutions for industrial customers.

We provide customers with a wide range of industrial process solutions for material dehydration, including dryers, filtration equipment, evaporators, mixers, granulation equipment, packaging equipment, pumps, weighing equipment and heat exchangers. Our products serve global customers in chemical, food, pharmaceutical, mining, general industry and sludge treatment markets.

We are a manufacturer and after-sales service provider of highly engineered products and process solutions, which are widely used in various industrial manufacturing industries, including pumps, rotary valves, atomizers and industrial control systems. To provide high-quality, competitive price products and services to global customers.

FAQ

Q:Are you manufacturer or trading company?

A:We are group company 20 years experience professional manufacturer of drying machine,mixing machine,granulating machine.And we also have 20 years experience for exporting machines.

Q:Where is your factory located?

A:The factory located in Changzhou City,Jiangsu Province,near in Shanghai.Form Shanghai Pudong airprot to the factory is about 260Km,it need about 3 hours by car.

Q:If can make a testing in your factory?

A:Sure,our factory have Spray Dryer Machine for testing, you can take 10~50kgs raw material to our factory for testing.

Q:How Can I select the right Spray dryer Machine ?

A:We will help you choose the right type and model for Spray dryer Machine, by knowing the following information:

Liquid name and property: Solid contents(or water contents), viscosity , surface　tension and PH value.

Dried powder density residual water contents allowed, particle size, and maximum temperature allowed.

Output capacity: shift time daily .

Energy that can be supplied: steam pressure, electricity properly , fuel of coal, oil　and natural gas .

Control requirement: whether or not the inlet and outlet temperatures should be controlled.PLC or button type,electric component brand require.

Powder collection requirement: whether it’s necessary to use cloth bag filter and the requirement of the environment of the exhausted gas .

Other special requirements.

Contact Us

BILLICOM GROUP CO.,LTD

ADD: RM28-5,Changhong Jiayuan,Hutang Town,Wujin,Changzhou city,China

Tel : +86-519-89821556

Fax: +86-519-89821556

E-mail:info@billicomgroup.com

Whatsapp: +86-13961187595