Storage of spray dryer

Storage of Spray Dryer

How to store centrifugal spray drying equipment after it is not used for a long time?

If the centrifugal spray drying equipment is not used for a long time, the following are some recommended storage measures:

1. Cleaning equipment: Before storage, clean the equipment, including internal and external components. Remove all residues and dirt to prevent them from accumulating on the equipment and causing corrosion or other damage.

2. Rust prevention treatment: Apply rust prevention treatment to the metal surface to prevent rusting and corrosion. Anti rust spray or application can be used to ensure sufficient coverage of the equipment surface and follow the manufacturer's instructions.

3. Protection of electrical components: for electrical components of centrifugal spray drying equipment, such as control panel, wire and sensor, protective measures shall be taken to avoid damage from dust, moisture or other pollutants. You can use a dust cover or cover with plastic film for protection.

4. Appropriate storage location: Choose a dry, ventilated place with equipment away from direct sunlight for storage. Avoid exposure to damp or dusty environments to avoid adverse effects on the equipment.

5. Regular inspection: Regularly inspect stored equipment to ensure its good condition. Regularly clean and maintain equipment to avoid damage caused by dust, foreign objects, or corrosion.

6. Follow the manufacturer's advice: It is important to follow the storage recommendations and guidelines provided by the manufacturer. Different models and brands of centrifugal spray drying equipment may have specific storage requirements, which shall be stored and maintained according to the instructions provided by the manufacturer.

Please note that these are general recommendations, and specific storage requirements may vary depending on equipment model, material, and manufacturer's recommendations. Therefore, before storing, please carefully read and follow the storage guidelines and instructions provided by the device manufacturer.